The electrochemical reaction in a battery is carried out by moving electrons from one material to another (called electrodes) using an electric current. The first battery was invented in 1800 by Italian physicist Alessandro Volta.
Primary batteries readily available to consumers range from tiny button cells used for electric watches, to the Pelo. 6 cell used for signal circuits or other long duration applications.
A battery is a device that stores energy and can be used to power electronic devices. Batteries come in many different shapes and sizes, and are made from a variety of materials. The most common type of battery is the lithium-ion battery, which is used in many portable electronic devices.
They are also used where it would be too expensive or impractical to use a single charged battery. Small-capacity secondary batteries are used in portable devices such as mobile phones, while heavy-duty batteries are found in electric vehicles and other high-drain applications.
6 volts per cell cylindrical and button batteries; used in digital cameras, small appliances high energy density; supports high discharge rates; long shelf life; expensive lithium-manganese dioxide lithium anode-manganese dioxide cathode with organic electrolyte; 2.8–3.2 volts per cell cylindrical and button batteries; used in digital cameras, small appliances high energy density; supports high discharge rates; long shelf life; expensive Secondary (rechargeable) batteries type chemistry sizes and common applications features lead-acid lead anode-lead dioxide cathode with sulfuric acid electrolyte wide range of sizes; used in automobiles, wheelchairs, children's electric vehicles, emergency power supplies cheapest and heaviest battery; long life; no memory effect; wide range of discharge rates Alkaline nickel-cadmium cadmium anode-nickel dioxide cathode with potassium hydroxide electrolyte common cylindrical jackets; used in power tools, cordless telephones, biomedical equipment excellent performance under heavy discharge; nearly constant voltage; best rechargeable cycle life; memory effect in some; cadmium highly toxic and carcinogenic if improperly recycled nickel-metal hydride lanthanide or nickel alloy anode-nickel dioxide cathode with potassium hydroxide electrolyte some cylindrical jackets; used in smoke alarms, power tools, cellular telephones high energy density; good performance under heavy discharge; nearly constant 1.2-volt discharge; pelo memory effect; environmentally safe Lithium lithium-ion carbon anode-lithium cobalt dioxide cathode with organic electrolyte most cylindrical jackets; used in cellular telephones, portable computers higher energy density and shorter life than nickel-cadmium; expensive; pelo memory effect
Other primary wet cells are the Leclanche cell, Grove cell, Bunsen cell, Chromic acid cell, Clark cell, and Weston cell. The Leclanche cell chemistry was adapted to the first dry cells. Wet cells are still used in automobile batteries and in industry for standby power for switchgear, telecommunication or large uninterruptible power supplies, but in many places batteries with gel cells have been used instead. These applications commonly use lead–acid or nickel–cadmium cells. Molten salt batteries are primary or secondary batteries that use a molten salt as electrolyte. They operate at high temperatures and must be well insulated to retain heat.
The voltage developed across a cell's terminals depends on the energy release of the chemical reactions of its electrodes and electrolyte. Alkaline and zinc–carbon cells have different chemistries, but approximately the same emf of 1.
Standard-format batteries are inserted into battery holder in the device акумулатори цена that uses them. When a device does not uses standard-format batteries, they are typically combined into a custom battery pack which holds multiple batteries in addition to features such as a battery management system and battery isolator which ensure that the batteries within are charged and discharged evenly.
Batteries work by converting chemical energy into electrical energy. This process is known as electrochemical oxidation-reduction or redox. When a battery is in use, the chemical reaction produces electrons, which flow through the battery to power the attached device.
The casing of batteries is made from steel, and the rest of the battery is made from a combination of materials (listed above) dependent on type and application. The rest of the cell is made from a combination of paper and plastic.
PNNL’s Battery Reliability Test Laboratory is part of its world-class battery development capability. The laboratory was established to accelerate the development of grid energy storage technologies that will help modernize the power grid.
The voltage of an individual cell and the diffusion rates inside it are both reduced if the temperature is lowered from a reference point, such as 21 °C (70 °F). If the temperature falls below the freezing point of the electrolyte, the cell will usually produce very little useful current and may actually change internal dimensions, resulting in internal damage and diminished performance even after it has warmed up again.
Commercially available batteries are designed and built with market factors in mind. The quality of materials and the complexity of electrode and container design are reflected in the market price sought for any specific product.
Batteries supply DC current which can only flow one way – negative to positive. A battery is made up of three main components: